Westa Sound

Sale!

M-Audio BX8 D3 8" 2-Way Powered Studio Monitor

210,000

M-Audio BX8 D3 Specs

Type 2-way
Inputs 1 x XLR 3-pin (balanced)
1 x 1/4″ TRS (balanced/unbalanced)
Drivers 1 x 8″ / 203 mm Kevlar woofer
1 x 1.25″ / 32 mm silk dome tweeter
Amplifier Class A/B
Power Output Low Frequency Amp: 80 W
High Frequency Amp: 70 W
Magnetically Shielded Yes
Frequency Response 37 Hz to 22 kHz
Crossover Frequency 2 kHz
Input Sensitivity -12 dBU
Input Impedance 10 kOhms (balanced)
20 kOhms (unbalanced)
Maximum SPL 114 dB (measured with full-bandwidth pink noise)
Power 100 to 120 V, 50/60 Hz
220 to 240 V, 50/60 Hz
Consumption 150 W
Polarity Positive signal at “Plus” input produces outward low-frequency cone displacement
Electrical Protection RF interference
Output current limiting
Over temperature
Turn on/off transient
Subsonic filter
External mains fuse
Fuse 100 to 120 V ~ T2AL 250 V
220 to 240 V ~ T1AL 250 V
Cabinet Vinyl-laminated, high-acoustic-efficiency MDF
Dimensions (W x D x H) 9.8 x 11.9 x 15.1″ / 250 x 302 x 384 mm
Weight 23.1 lb / 10.5 kg
Packaging Info
Package Weight 30.1 lb
Box Dimensions (LxWxH) 20 x 16.4 x 14.2″
Category

Description

The BX8 D3 from M-Audio is a 2-way, 150W powered studio monitor designed to offer a wide frequency response and easy configuration for mixers, DJs, producers, and recordists in small to medium control rooms, personal studios, and mobile rigs. The monitor produces a frequency response of 37 Hz to 22 kHz, thanks to two Class A/B amplifiers feeding an 8” Kevlar woofer and a 1.25” silk dome tweeter.A rear-mounted bass port delivers extended bass response, while the tweeter’s custom waveguide yields a wide sweet spot and minimized high-frequency scatter. Volume and low-frequency controls are provided so you can tune the monitor to cooperate with the sound of the room. Place the monitor on the supplied acoustic foam pad to decouple it from your table or stands, which aids in reducing unwanted bass vibrations.

The BX8 D3 can interface with a variety of equipment, via balanced XLR and balanced/unbalanced 1/4” TRS input jacks. Setup is simple, due to the front-mounted LED, which appears brighter when you are at the ideal angle.@westasound.com

Reviews

There are no reviews yet.

Be the first to review “M-Audio BX8 D3 8″ 2-Way Powered Studio Monitor”

Your email address will not be published.